3 Items in your cart 
t slot plate aluminium
-1263 items in stock
t slot plate aluminium offer extreme durability in outdoor exposure as well as indoors because of our high-quality paint system. t slot plate aluminium
More DetailsProduct Information
t slot plate aluminium are medium strength alloy plates with exceptional corrosion resistance. Aluminum sheet plates are created by surpassing aluminum between rolls underneath pressure, it becomes thinner and longer in the moving direction.
Mechanical strength, rust resistance and dimensional stability are key aspects that give these t slot plate aluminium the advantage over standard aluminum plates. The t slot plate aluminium lend itself only to resistance welding. These plates have good workability but varies in tempers. The alloy plates are available in variety of sizes and thickness.
These t slot plate aluminium are made from marine grade alloys and find usage in manufacturing of fast ferries, yachts, navy or passenger vessels and small pleasure crafts.
Specifications
| Alloy | Temper | Thickness | Width | Length |
|---|---|---|---|---|
| 1050 3003 2024 5005 5052 5754 5083 5086 6061 6063 6082 7075 | O H111 H112 H116 F T3 T4 T6 T651 | 4.5-220mm | 500-2250mm | 1000-6000mm |
Chemical Composition % Max.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | Total | ||||||||||||
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 0.03 | – | 0.03 | – | 99.50 |
| 2017 | 0.20 -0.8 |
0.70 | 3.5 -4.5 |
0.40 -1.0 |
0.40 -0.8 |
0.10 | – | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 2024 | 0.50 | 0.50 | 3.8 -4.9 |
0.30 -0.9 |
1.2 -1.8 |
0.10 | – | 0.25 | 0.15 | 0.05 | 0.15 | Remainder | |
| 3003 | >0.60 | 0.70 | 0.05 -0.20 |
1.0 -1.5 |
– | – | – | 0.10 | – | – | 0.05 | 0.15 | Remainder |
| 5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.50 -1.1 |
0.10 | – | 0.25 | – | – | 0.05 | 0.15 | Remainder |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2 -2.8 |
0.15 -0.35 |
– | 0.15 | – | – | 0.05 | 0.15 | Remainder |
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6 -3.6 |
0.30 | – | 0.20 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 5083 | 0.40 | 0.40 | 0.10 | 0.40 -1.0 |
4.0 -4.9 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 5086 | 0.40 | 0.50 | 0.10 | 0.20 -0.7 |
3.5 -4.5 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 6061 | 0.40 -0.8 |
0.70 | 0.15 -0.40 |
0.15 | 0.8 -1.2 |
0.04 -0.35 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 6063 | 0.20 -0.6 |
0.35 | 0.10 | 0.10 | 0.45 -0.9 |
0.10 | – | 0.10 | 0.10 | – | 0.05 | 0.15 | Remainder |
| 6082 | 0.70 -1.3 |
0.50 | 0.10 | 0.40- 1.0 |
0.60 -1.2 |
0.25 | – | 0.20 | 0.10 | – | 0.05 | 0.15 | Remainder |
| 7075 | 0.40 | 0.50 | 1.2 -2.0 |
0.30 | 2.1 -2.9 |
0.18 -0.28 |
– | 5.1 -6.1 |
0.20 | – | 0.05 | 0.15 | Remainder |
Featured Products
5083 Aluminum Alloy
Available in marine grade tempers H116, H321, H323 to spec ASTM B928. This is an excellent alloy, which is primarily used for its corrosion resistant properties. With possessing good welding capabilities for fabricating vessels it is a good standard engineering alloy. This alloy is commonly used in Europe and Asia.
5086 Aluminum Alloy
Available in marine grade tempers H116, H321; to spec ASTM B928. Tempers O, H112, H32; to spec ASTM B209. The marine grade alloy is very good at inter granular corrosion and possess better welding and forming properties. This alloy is commonly used in North America.
5454 Aluminum Alloy
The alloy is most commonly used where excellent forming ability is required and is available in O, H112, H32, H34; to specification ASTM B209 Tempers. It serves as the manufacturing material for large pressure vessels and certain marine fabricated products.
5052 H32 Sheet & plate
It is an alloy possessing good strength and welding ability, which is also easy to form and fabricate. This alloy is not considered a true marine alloy.
6061 T6 Sheet & plate
It is a heat treated alloy possessing higher strength and is used in many general engineering applications. This alloy is also not considered as true marine alloy.
Tag
t slot plate aluminium,t,slot,plate,aluminium
10mm thick aluminium sheet
New | aluminium alloy plate
10mm thick aluminium sheet is also commonly referred to as either checker plate, durbar or check plate gets its name from the distinctive 5 raised bars.
View Details
aluminium flat plate
New | aluminium alloy plate
aluminummetals Supplies has a full range of aluminium flat plate Sizes & Thickness available from our aluminummetals, including 0.9mm, 1.6mm, 2mm, ...
View Details
diamond plate aluminum sheets 4x8
New | aluminium alloy plate
diamond plate aluminum sheets 4x8 is strengthened by strain hardening (cold work). It is a weldable, moderate strength alloy which exhibits good corrosion resistance in the
View Details
15mm aluminium plate
New | aluminium alloy plate
Shop our selection of 15mm aluminium plate in the Hardware Department at The aluminum metals Online
View Details
slotted aluminum plate
New | aluminium alloy plate
slotted aluminum plate - Buy slotted aluminum plate at best price of Rs 180 /kilogram(s) from haomei aluminium.. Also find here related product
View Details
plate aluminum near me
New | aluminium alloy plate
Offers excellent quality plate aluminum near me in a wide range at an affordable price. Products available in two different designs – Ali bright and 5 Bar pattern.
View Details
Contact Details
Email:alu@haomeicn.com
Email:wade@haomeicn.com
Tel (86) 371-6562-1391Fax (86) 371-6562-1393
web:aluminummetals.com
SOCIAL MEDIA